Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Stan's NoTubes Presta Removeable Valve Core
$2.00
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
Lezyne CNC TLR Valve Pair
$20.99 - $21.99
- CNC-machined tubeless valves with aluminum stem nut and valve core wrench cap - Fit for most other tubeless rims and wheel
Ritchey Snap-On Rim Strip
$8.95
Lightweight and easy to install, there are Ritchey rim strips for all wheel sizes and types. - Easily snaps over your rims - Stretchy, tightly woven material provides a close fit and protects from abrasion - Sold as a pair - Not for tubeless set up
Ritchey Hub Conversion/Service Kit For WCS Disc Hubs—Rear 148mm Boost
$40.95
Hub WCS Disc Rear 148mm Boost Conversion/Service Kit - Authentic Ritchey axle conversion kits for road disc wheels
DT Swiss RWS MTB Rear Thru Axle - E-Thru
$38.90
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening - For E-thru axle frames - Length: 171mm - Thread Pitch: 12 x 1.5mm
Kink Universal Freecoaster Guard
$19.99
The Kink Universal Freecoaster Guard is designed to fit with most modern freecoaster hubs. It features a threaded chromoly core that replaces the hubs existing cone nut(s) and also includes a spacing washer for hubs using a wider cone. The nylon guard itself fits over the chromoly core and is injection-molded from ultra-durable nylon material. This guard fits on the non-drive side only.
SRAM Maxle Stealth Rear
$34.00
Who knew we could make a thru axle disappear? The Maxle Stealth offers a light, low profile alternative to Maxle Lite. Features - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench
SRAM 9/10 Speed Freehub Body for 746 Rear Hub
$77.00
- Original equipment freehub bodies to fit SRAM hubs and wheels. - Includes Right Axle End Cap
WTB TCS Rim Tape
$14.95 - $72.95
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
DT Swiss Tubeless Ready Rim Tape
$24.50
DT Swiss tubeless-ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type setups. - Durable adhesive tape works as a rim tape and airseal
Stan's NoTubes Rim Tape
$11.25 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Race Face Trace Freehub Body
$95.00
Replacement Freehub Body for Trace hubs.
Robert Axle Project Front Lightning Bolt-On Thru Axle
$42.00 - $48.00
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding. - The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
HALO Front Axle Conversion, Wide Boy
$19.95
- Front axle conversion, 15mm thru-axle, Wide Boy - Conversions for fitting a Wide Boy hub onto either a 15mm or 20mm thru-axle fork
HALO Rear Axle Conversion, Spin Doctor Pro
$19.95
- Rear axle conversions for Spin Doctor Pro rear hub - Various replacement axles and conversion kits for Spin Doctor and Spin Doctor Pro hubs - Some conversions utilize pre-existing axle components for retrofit - Conversion kits for original Spin Doctor and Spin Doctor Pro hubs are not compatible with Spin Doctor 6-Drive hubs
SRAM XD Driver Freehub Body for 900 Rear Hub
$72.00
Replacement freehub body for Sram 900 series hubs
Stan's NoTubes Neo Front Hub End Caps
$20.00 - $21.00
Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place
Stan's NoTubes Neo OS Front Hub End Caps
$22.00 - $24.00
Front SealLock end caps for Neo OS and Neo Ultimate OS hubs. SealLock end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Not compatible with non-OS hubs or Centerlock hubs.
Wheels Manufacturing Inc. Freewheel/BB Spacer
$22.05
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
Muc-Off No Puncture Hassle Tubeless Sealant
$9.99 - $153.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable
Mission BMX Axle Nuts Aluminum
$9.99
A pair of lightweight, 17mm aluminum axle nuts. - 14mm fits most rear axles (M14xP1.0) - 3/8" fits most front axles (3/8x26T) - 7075-T6 aluminum - Weight: 0.8oz
OneUp Components Axle R
$43.50
We loved the simplicity and clean look of Axle F so we made Axle R. Using a solid 7075-T6 rod rather than a hollow tube makes this the strongest possible rear axle design while still being lighter than a stock 12mm thru axle with integrated lever. If you already carry the EDC multitool with you, there's no need for the heavy integrated lever which can snag on trail-side obstacles. Add one of our coloured cap kits to match your Axle R to your bike. FEATURES - Lighter than stock 12mm thru axles with integrated lever or QR - 7075-T6 Solid rod design for maximum stiffness and strength - Low profile head won't get caught on trail-side obstacles. - 5mm and 6mm hex interfaces - All common axle length/thread combinations covered COMPATIBILITY - You need to know both your axle length and axle thread pitch to select your new OneUp axle. These are both specific to your frame. Hub spacing (e.g. 142x12) does not denote your axle size. Your axle length and pitch might be laser etched on your existing axle (e.g. 178 x 1.5). Check here first. If your axle size is not marked, check with your frame manufacturer. Axle specs are not usually listed on website specs. - Check our printable axle selector to ensure you pick the right length/thread pitch - NOT compatible with tapered "Syntace X-12" style axles
Easton 11-Speed XD Driver Body for X5 hubs
$99.99
Replacement freehub bodies for Easton X5 hubs. - Material: Aluminum - Cassette Body Type: SRAM XD 11/12 Speed
WTB TCS AL 46mm Presta Valve
$25.95
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 46mm
WTB TCS AL 34mm Presta Valve
$24.95
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm
HALO Porkies Quick Release Skewers
$24.95
- Longer skewers fit modern frames/forks with thicker dropouts - Aluminum lever/nut, Delrin pivot washer, serrated alloy nut with Nylock - White skewers are powder-coated - Shaft: chromoly - Wheel: front/rear - Spacing (front/rear): 100/135mm - Weight: 112g/set
HALO Rear Axle Replacement Kit, DJD/Supa Drive
$19.95
- Rear axle replacement kit, 10mm nutted, DJD-SupaD - Spin Doctor, Spin Doctor Pro and Spin Doctor 6-Drive parts are generally not cross compatible - DJD and DJD-BD parts are generally not cross compatible
Identiti Rebate 14/20 Axle Kit
$29.95
- Replacement 14mm/20mm axle kit - Spare 14mm steel axle with 20mm alloy sleeve - Alloy axle bolt
Crank Brothers XD Driver Body
$99.99
- Replaces freehub body on current Cobalt or Iodine wheels with SRAM XD compatible body
Crank Brothers Rear Endcap Conversion Kit
$19.99
These kits convert Crankbrothers rear hubs to 12mm thru axle and 10mm QR spacing. - 135×10QR – 2017 3 & 11 kit (SKU 99204) compatible with: Level 3 & 11 4th generation (2017+) hubs - 142/148×12TA – 2017 3 & 11 kit (SKU 99205) compatible with: Level 3 & 11 4th generation (2017+) hubs - weight 23g per pair
Page 1 of 7 Next page